Installing the SureCall Fusion2Go 2.0 4G Extreme Mobile Signal Booster Kit is very easy and can usually be done in just a few minutes. Since the installation is not permanent, the kit can be transferred to another vehicle as needed.
To start, mount the mini-mag antenna on the roof of the vehicle. The antenna must be stuck to a metal surface. If you have a sunroof, position the antenna well behind the sunroof to increase the separation between the inside and outside antennas. Run the cable in through a door opening, under the door weather stripping to protect the cable. Connect the cable to the amplifier’s Outside Antenna port. To the inside connect the inside antenna cable. Locate the inside antenna near where you’ll typically be using the phone, for example, in the center console or on the side of the driver’s seat. Ensure that the cables and amplifier won’t be damaged if the front seats are adjusted. Keep inside antenna at least 8 inches for any person and approximately 18 inches from where you typically use your phone. Power on the booster and you should immediately start receiving boosted signal from the internal antenna.