About This Product
Product Description
Whether you are an extreme outdoors person or not, everyone hits dead or low coverage zones on their cell phone network while they are traveling. The last thing you need is to have an emergency and have no ability to call for help. We find ourselves in many areas with limited coverage, whether it is in Zion Canyon, Yant Flat, Pine Valley, Snow Canyon, or any number of places in Washington County, we have seen our cell coverage boosted in incredible ways with this product from SureCall! Check out the specs below. You can’t afford not to have this in your vehicles!
What Will It Do for You?
- Boosts signal for voice, text & 4G LTE for all cellular devices and all cell carriers
- Reduces the number of dropped and missed calls
- Extends your battery life because your phone isn’t searching for signal
- Increases 4G LTE data speeds in low coverage zones
- No cradle or docking station required – just have to be in or around the vehicle
- Easy setup and install!
How Does It Work?
The SureCall Fusion2Go 2.0 works by placing a 4 in. magnet mount antenna on the roof of the vehicle where it can receive the outside cell signal, which is then passed over a cable to the signal amplifier located inside of the vehicle. The amplifier boosts the cell signal, and then sends it over another cable to a small inside antenna, which broadcasts the boosted signal to the area of the vehicle that needs it.
Installation Overview
Installing the SureCall Fusion2Go 2.0 4G Extreme Mobile Signal Booster Kit is very easy and can usually be done in just a few minutes. Since the installation is not permanent, the kit can be transferred to another vehicle as needed.
To start, mount the mini-mag antenna on the roof of the vehicle. The antenna must be stuck to a metal surface. If you have a sunroof, position the antenna well behind the sunroof to increase the separation between the inside and outside antennas. Run the cable in through a door opening, under the door weather stripping to protect the cable. Connect the cable to the amplifier’s Outside Antenna port. To the inside connect the inside antenna cable. Locate the inside antenna near where you’ll typically be using the phone, for example, in the center console or on the side of the driver’s seat. Ensure that the cables and amplifier won’t be damaged if the front seats are adjusted. Keep inside antenna at least 8 inches for any person and approximately 18 inches from where you typically use your phone. Power on the booster and you should immediately start receiving boosted signal from the internal antenna.
Highlights
Details
- Supported Phones
- All Cell Phones, Hotspots, and any Devices that use Cellular Data
- Networks
- 2G, 3G, 4G & 4G LTE
- Frequencies
- 700, 800, 1900, 1700/2100 MHz
- Carriers
- Works for all Carriers in North America, including: AT&T, Verizon, Sprint, T-Mobile, US Cellular, Bell, Telus, Rogers, Freedom Mobile


